About   Contact    |  

YanMao Group palletizer China palletizer manufacturer

Focus on the development and manufacturing of automatic carton palletizers for 10 years



Low position palletizer (how much is a set of high position stacker)

A list of the contents of this article:

The difference between high position stacker and low position palletizer

One is a single palletizing in the high position, neatly placed, and the other is in the low position, a combination of several palletizing.

What factors need to be considered in the palletizing process?

The choice of warehouse has a great impact on the later operation of enterprises, and it is also the beginning of operation planning and layout. Many enterprises, especially those with rapid development, still rely on experience and feeling in choosing warehouse. The emphasis on immediate demand and the lack of long-term planning consciousness caused some limitations for the warehouse operation planning in the later stage.

Today, I would like to share with you several aspects that need to be considered in the location of the warehouse.

The location of the warehouse should follow three standards and two factors. First of all, let’s talk about the three criteria for warehouse location: basic standards, rigid standards, and room for appreciation.

First, the basic standards are the basic requirements for warehouse location. The more basic requirements are met, the more convenient the operation will be.


Transportation capacity

Warehouse logistics center must have convenient transportation conditions, preferably close to the transportation hub for layout. Close to the port, trunk road hub, railway marshalling yard or airport, there are more than two modes of transportation connected.


Surrounding public facilities

The location of the warehouse logistics center requires that the city’s roads, communications and other public facilities are complete, with adequate power supply, water, heat and gas capacity; the surrounding facilities can ensure the office and living problems of warehouse operators.


The warehouse is a flat layout.

The closer the warehouse is to the square, the better the layout, and the higher the operation efficiency. The storehouse needs to focus on the layout, the flow of goods upstairs and downstairs, as well as the renovation space of the storehouse.


Fire fighting facilities

The warehouse has fire-fighting facilities to meet the fire-fighting needs, and has the fire-fighting acceptance certificate of the fire department.


Requirements for warehouse posts

The columns in the reservoir had better be as few as possible, and the absolute parallelism of the columns should be ensured to facilitate the planning of the reservoir area and the rational use of the space in the reservoir area; parallel wire ropes should be drawn above the pillars to facilitate the suspension of lighting equipment at night.

Second, the rigid standard is the condition that must be met in the location of the warehouse, and only when these conditions are met can the warehouse have room for promotion.

1. Ground requirement

The ground should be hard, preferably epoxy floor, so as to facilitate the use of operating tools in the warehouse, reduce the production of dust and impurities, facilitate sanitary finishing and ensure the quality of the goods in the warehouse.

two。 Warehouse height

The warehouse should be high enough to facilitate the construction of shelves and guard against theft; to ensure the lighting of the warehouse, there should be lighting panels at the top and around the warehouse to facilitate daytime work and save money.

3. Support for network installation

4. Warehouse platform

The warehouse is preferably a circular platform, and the minimum requirements are bilateral platforms to facilitate the handling of goods; the height of the platform should be consistent with the height of the company’s vehicles to facilitate operation; the platform is equipped with rain-proof facilities to ensure the quality of goods handling.

5. The warehouse needs to have the relevant qualification certificate of business license and land use license.

Third, room for appreciation. Can the warehouse still have room for appreciation? The appreciation space mentioned here is not only the appreciation space of the real estate industry, but also depends on the availability of the warehouse.

Structural characteristics of palletizer

The middle and low position palletizer is mainly composed of flattening conveyor, slow stop conveyor, indexable conveyor, pallet silo, pallet conveyor, marshalling machine, pouch pushing device, palletizing device and palletizing conveyor. Its structural design is optimized and its action is stable and reliable. The palletizing process is completely automatic and does not require human intervention in normal operation, so it has a wide range of application.

What are the types of palletizers?

Automatic palletizer systems are generally divided into the following three categories:

High position palletizer

Turn left | turn right

Yuzhuang YZ-HP high position palletizer

Fully automatic high position stacker

Video from: Youku

High position palletizer video

The high-position palletizer receives the palletizing products at a certain height or level above the pallet. Blank pallet from one

A silo or accumulation station goes down to the palletizer, where the machine stretches the pallet and positions it under a pallet; the product is loaded into a pallet and assembled into a layer or row.

The palletizer places the assembled product layer or product column on the pallet below them; then the palletizer continues to assemble the second layer of products, changing the arrangement format of the cartons to match the pallet format; after that, the pallet

And the first-tier product will go down one layer so that the second-tier product can be placed on the first-tier product. The pallet keeps falling.

Layer after layer of products continue to be high until the specified number is completed; the pallets then slowly descend to the ground level and are then transported to other sections by transporters or forklifts. Back and forth.

Middle and low position palletizer

Turn left | turn right

Yuzhuang YZ-LP low position palletizer

Mengniu milk automatic palletizer

Video from: Youku

Low position palletizer video

Middle and low position palletizer: the situation of middle and low position palletizer is similar to that of high position stacker. It’s just that the pallets on the middle and low position pallets do not need to be raised.

High and low, the product layer and product line are formed at a level close to the ground. Each layer of products is made on a tray.

After the shape, then lift it and place it on a fixed pallet. After that, the tray goes back to the starting point to load the next layer of products. Goods

After the tray is loaded, the palletizer unloads it, and another blank pallet replaces its original position, and so on.

Robotic palletizer

Turn left | turn right

Yuzhuang YZ-RP robot palletizer

The mechanical hand palletizer is self-contained.

Video from: Youku

Robot palletizer video

Robotic palletizer: a robotic palletizer is often seen as a grab and placement system, which can be obtained from one or more locations.

Grab one or more cartons and place them in a pre-set location on the pallet. Basic computing power, plus

Sensors can be integrated to identify product changes, making the robot palletizer an intelligent system that can identify and distinguish a variety of products.

Products; a robot can automate multiple production lines, arranging the shipping ports of multiple production lines next to a robot station, and the robot can identify and process a variety of products; robot palletizing can also produce pallets of different sizes and shapes.

This is the end of the introduction of the low stacker. Thank you for taking the time to read the contents of this site. For more information about how much a set of high stacker is and how much it is, don’t forget to look it up on this site.



Leave a Reply



Leave a message