After the workers have finished packing the product, they enter the conveying line 1, and the product is transported to the box sealing machine, and then through the conveying line 2, there is a positioning device in Line 2, which can also be called the positioning baffle (which has been successfully applied in the Wa production line). This device and the positioning plate can complete the rotation and positioning of the box, which can be positioned on the left and then transported to the buffer zone 1, which has a booster device. The device can properly transport the box to the free space and push the full tray to the buffer zone 2. Above the buffer zone is a code stomping robot. Through the robot sucker, the robot elevates 15 boxes (15 in small bags and 8-10 in boxes and listening) vertically and runs horizontally to avoid the safe passageway. The width and height are 2 meters. After passing through the safe channel, it is placed vertically in the yard stomp area, and the front positioning bezel has rotated the box, so the manipulator does not need to rotate, after placement is completed. Return according to the original path, after completing the 10-story code stomping area, it will be forked away by the forklift and the idle code plate will be placed. The front buffer 2 code disk is empty after the box body is removed, which can be manually removed and placed in buffer 1 when the buffer 1 code disk is delivered.
The system is also equipped with an emergency stop button, which can be stopped manually or automatically; a raster safety system is installed within the working range of the robot support frame, and the alarm signal light is on in the fault or abnormal condition, and the system stops emergency. the system can continue to run after the alarm is excluded in the manual state; it has automatic memory function and can continue to complete the work after a power outage or failure.
The drawing of the transmission line is as follows:
Operational efficiency calculation:
According to the sealing time of 15 boxes / min provided by the customer, if a grab box takes 4 seconds to run, the product is lifted, transported and placed back in accordance with the path. because the lower part is the walking area, the differential compensation movement of the guideway can not be applied, but can only take a straight line. It is possible to use such a working speed that is not completed, and it is very unsafe. according to the way the box is transported as a whole, it takes 60 seconds for a code disk to fill up. In these 60 seconds (the other two can have 32 seconds-40 seconds, can code 8-10), there is plenty of time to complete boosting, grab lifting, conveying, placing and returning.
The above is the product transportation mode of box packaging, please refer to the effect drawing for the specific process.
The production cycle of large bag products is 15 seconds per bag, so directly complete a single yard stomp transportation, the time is also very sufficient, mainly because the load is not large, so the running speed can be improved.
To sum up, the efficiency of handling and palletizing is greatly improved by using Shenyang Ding cold mechanical and electrical palletizing robot. Save a lot of manpower, greatly reduce the cost of labor. The cost of the robot can be recovered after one year of operation. The robot has been operating under normal maintenance for at least ten years. With the rise of a large number of fully automated palletizing production lines, this palletizing system will have a wider market prospect and development potential!
For random pallets, palletizing robots are the only option. In spite of this, robot loading also faces many problems, and it will be more difficult to produce at a higher speed.
A robotic palletizer that handles random loading requires special software, which connects the robot palletizer to the rest of the production line, which is a huge step forward.
A robot used to build random pallets can be integrated into the factory’s warehouse management system (WMS). Ideally, it would be the front part of WMS, working in coordination with warehouse software to produce hybrid pallets.
Sophisticated software can also meet the need for immediate shelving. Generally speaking, this means that after the product is stacked, the labels of some or all of the packaging containers must be facing outward. Robotic palletizing equipment is also an option for another demanding application: palletizing in a frozen warehouse. In the field of consumer packaging, handling boxes in a frozen warehouse is one of the most difficult tasks. Workers have to work frequently to keep warm, which indirectly reduces work efficiency and increases labor costs.
In a frozen environment, automated random access palletizers are not the right choice, as most automated random access palletizers use compressed air tubes that freeze in cold storage. Compared with the automatic palletizer, the size of the palletizing robot is more compact, which is particularly important because the space in the frozen warehouse is very precious. In spite of this, there are some problems in the application of robots in frozen warehouses. Some suppliers have begun to design special palletizing robots for frozen warehouses.
When using a palletizing robot, there is also an important thing to consider, that is, how to grasp a product. Vacuum grip is the most common manipulator arm end tool (EOAT). They are relatively cheap, easy to operate, and can effectively load most of the load. However, in some specific applications, vacuum grips will also encounter problems, such as porous matrix on the surface, flexible packaging in which the content is liquid, or uneven packaging and so on.
Other EOAT options include a flip grip, which clamps the sides of a bag or other form of packaging, a fork grip, which is inserted into the bottom of the package to lift the package, and a bag grip, a mixture of flip and fork grips, whose fork covers the bottom and sides of the package.
Other combinations of basic EOAT types are also possible. A beverage Packer has difficulty palletizing a corrugated tray that is full of bottles and shrinks. The vacuum sucker will pull the film off the tray.
Good performance, good service, series labeling machine, self-adhesive labeling machine, round bottle labeling machine
First, professional manufacturing has a long history
1. Founded in 1974, the company specializes in the R & D, production and sales of high-speed self-adhesive labeling machines, labeling machines and filling machines, and is determined to provide customers with systematic packaging solutions. At present, it ranks among the top two in the field of domestic marking. The main products are horizontal ampoule / oral liquid bottle labeling machine, round bottle labeling machine, high-speed labeling machine, small capacity filling machine, large capacity filling machine, hose filling machine, automatic electronic weighing filling machine., with the continuous development of business, successively established Shanghai Pingzhen Packaging Machinery Co., Ltd., Shanghai Libei Packaging Machinery Co., Ltd., and set up a technical support center to provide innovative and efficient service to customers.
2, the company is based in Shanghai, all the operation, management, technology, quality and service are very mature. With more than 30 years of technology accumulation and innovative development, Lifeng labeling machine, labeling machine and filling machine are ahead of their peers in terms of “speed, accuracy and stability”, which has made LEBAL a leading brand in Asia.
Second, loyal service enjoys a good reputation at home and abroad
1. The company has been taking “customer-oriented sustainable service” as its own service concept, and wholeheartedly provides customers with quality products and perfect services. and in the enterprise internal departments to implement “layer upon layer service-each department to its service department as the customer”, due diligence, sustainable, comprehensive and accurate service, in order to achieve comprehensive service to customers and ensure the quality of service.
2. With its “fast, accurate and stable” product quality and sustainable and loyal service level, the company has won a good reputation from customers at home and abroad. Labeling machines and labeling machines are sold in Europe and the United States, the Middle East, Central and South America, Southeast Asia and other countries in the world.
Third, exquisite technology and human nature design
1, servo motor leader company painstaking research, as early as the 1980s leading the use of AC servo motor, labeling speed of up to 1200 times per minute, and never lose step, highlighting the advantages of fast, accurate and stable products.
2. Humanized operation interface microcomputer control system and humanized operation interface enable the system to automatically complete the calculus and preparation of all conditions, and to make self-diagnosis.
Fourth, many customers have a good reputation
1. The company’s products are involved in many fields, including daily chemical (40%), medicine (30%), food and beverage (25%), and actively enter into health products, alcohol, biological high-tech and other fields. At present, Li Feng. Pingzhen labeling and labeling products occupy more than 85% of the market share in the field of daily chemical industry, and domestic large-scale daily chemical enterprises basically adopt LEBAL ®labeling machines and labeling machines.
2. High-quality products, perfect marketing network and first-class service have achieved more than 5000 customers in the world and more than 2000 customers in China. Successful service brands include: Procter & Gamble, L’Oreal, Unilever, Johnson, Hodi, Liuying, Johnson, Shanghai Jiahua, CD, Shell (China), PB Castrol, Mobil, Wa, Pepsi, Huiyuan Group, Robust, Prince Milk Group, Li Jinji, wife Le, Haitian, Shanghai Pioneer Pharmaceutical, Beijing Tongrentang, Jiangsu Kangyuan Pharmaceutical, Qilu Pharmaceutical Group, Ruiyang Pharmaceutical, Kuihua Pharmaceutical Group, Enwei Pharmaceutical, Chengdu Biology, Xinchang Pharmaceutical, Xiansheng Dongyuan Pharmaceutical Co., Ltd., Kangnbei Pharmaceutical Group, Jilin Aodong, Dalian Meiluo, Tonghua Jinma, Yunnan Baiyao.
How do large supermarkets find things stolen? Do you count every day or every few days? Supermarket workers enter
After the inventory of stores, most of them have the phenomena of recent decline in sales, low enthusiasm of employees, decadent spirit, negative service, verbal incitement, and even problems such as staff turnover in individual stores, difficulties in recruitment, and so on. the reason is that the difference in inventory is too large or beyond the psychological range of employees.
I. the importance of stocktaking
Stocktaking refers to the inventory of goods in stores to check whether the physical quantity is consistent with the account quantity of the computer system, so as to get the evaluation of operation and management work in a certain period of time. Analysis of inventory goods for commodity management, and as a decision-making basis for the development of enterprises in the future.
In a strategic sense, the inventory result is a yardstick of the company’s management level and an important yardstick of whether the company can continue to accelerate its development.
How to make good use of inventory? How to control store staff and goods more effectively through inventory? How to sublimate the inventory from dampening the enthusiasm of employees to a tool to mobilize their sense of responsibility and attitude of ownership? This will be a subject that we should think deeply about and need to improve urgently.
II. Causes of inventory discrepancies
1. The difference in the quantity of goods caused by external theft and internal theft caused by the quality of customers and employees.
2. The quantity difference caused by the negligence of the inventory personnel or the lack of professional level.
3. The quantity difference caused by the discrepancy between the weight of the goods distributed in the warehouse and the actual weight of the store (such as weighing goods such as rice, melon seeds, biscuits, etc.)
4, the quantity difference caused by the untimely processing of the system documents (including transfer documents, distribution documents, return documents and so on. )
5. quantitative differences caused by out-of-sync of commodity information (such as promotion bar code, new product filing, self-made bar code, promotion information, etc.)
III. Methods of data analysis
1. The comparison method of difference data in the current stocktaking.
All the profit and loss data of this inventory are derived and sorted, and the profits and losses are compared to find out whether the profit and loss numbers are exactly similar and the inventory items are similar.
Objective: to analyze whether there are any mixed stocks of similar items in this inventory. If after a review and make sure that the inventory data are correct, the analysis is caused by confusion of sales and acceptance factors.
2. Historical data comparison method:
Export all the profit and loss data of the last stocktaking and compare it with the data of this stocktaking.
Objective: to analyze whether the last stocktaking data is not allowed to lead to the profit and loss of this stocktaking. (the last inventory data are not in place, such as leaking, multiple and mixed, which can easily reflect the profit and loss of similar items in this inventory.) if there is a big difference after offsetting the data last time, then consider and analyze other reasons for existence.
3. Factor investigation method
View the whole piece and individual profit and loss data. Check one product multi-code, one product different bar code different commodity number, commodity information and commodity physical bar code.
Objective: to find out the retail data of whole dismantling and to find out the difference of inventory due to the problems of product name and bar code commodity data.
4. Data difference inquiry method
The director of the commodity department is relatively clear about the purchase, sale and storage of goods, operation, commodity activities and so on, and it is possible to know the reasons for the differences in stocktaking data.
Objective: to ask the head of the commodity department to state directly the reasons for the differences he knows.
5. Self-examination plus inquiry
Export three-tier account data to quickly view obviously abnormal data. At the same time, ask the supervisor of the commodity department, emphasizing the abnormal quantity, date and document number.
Objective: to help the director of the commodity department recall the abnormal data in his business process, and it is possible to recall and finally lead to the cause of the inventory difference.
6. Check the three-tier account data method
First look at the summary of the acceptance sheet data, distribution order data, and then look at the normal sales out of the warehouse, return out of the warehouse data. Compare the specific documents and dates of the collection points where there is the biggest difference between purchase and sales data, and check their details. Secondly, it is necessary to look for documents such as “0” purchase price, batch order, group purchase order, empty receipt and return order, price adjustment order, claim order, store and commodity administrative department inventory documents, long plate short order, clear transfer, transfer purchase, joint venture transfer, and so on.
Objective: to find the data that may have inventory differences in all document types in purchase, sale and inventory.
7. Check the unexamined and unapproved document Law
Check the unaudited and unregistered documents in the non-query status, especially the home appliance delivery slip. Household appliance delivery documents also need to pay attention to the query status and the date on which the distribution center system checks its audit.
Objective: to find out whether the difference in inventory is caused by the fact that the documents have not been audited and have not been approved.
8. Document method for viewing a series of commodities
Sensitive to data and keep in mind, it is easy to find out the data of repeated records.
Objective: to find out the difference of stocktaking caused by repeated record data.
9. System department input verification method
Check to see if the document is recorded in the wrong class before analysis. After the analysis, there are almost no problems in all links. It is necessary to consider whether the number of errors recorded during this inventory (wrong lines, serial lines, missing lines, etc.), and find out the original documents to check one by one in the case of sufficient time.
Objective: to find out whether the difference of inventory is caused by the error of document recording.
10. Single product inference method
It is inferred according to the different characteristics of each different commodity (such as milk powder is easy to be stolen, daily miscellaneous and knitted goods are easy to be sold in packages, milk retail, etc.).
Objective: to analyze the main causes of the differences in this commodity, and then find out the real causes of the differences according to various means and ways.
IV. Solutions
1. Quantitative differences caused by theft
Whether it is internal theft or external theft, I think it has something to do with the store staff’s lack of awareness of damage prevention and lack of responsibility. I do not fundamentally realize that the store is my home, that the goods in the store are my property, and that losing the goods means losing my money.
Solution to internal theft:
Adhere to the principle of cross-payment for shopping by employees and their families, the principle of showing shopping receipts consciously after work, the principle of double signatures for the transfer of receipts between stores, and the principle that goods in and out of stores must be recorded. Adhere to the principle of ten times compensation for internal theft and notification.
Solution to external theft:
Monitors have been installed in all the company’s stores, but it is only the store staff that really put an end to external theft. Some employees are very lazy during office hours, regardless of customer movements in the store, habits and actions such as chatting and playing with mobile phones give some unconscious people an opportunity. By the time it is found that the goods are missing, it is already too late or until the inventory time until the things are lost.
Solution: store staff should strengthen the function of shopping guidance and damage prevention, provide enthusiastic service, and respond to the handover between counter groups. In the case of low passenger flow, try to help customers deliver goods to the cashier. Do a good job in every process and details of customers entering the store: → three meters smile → storage → inquiry demand → transfer area head → guide consumption → related sales → to the next area head → after shopping, → handed over to the cashier → to hand over the special items → checkout sweep → three sing a → to pick up the checked goods → to see the customer off
2. The quantity difference caused by the negligence of the inventory personnel or the lack of professional level.
Strengthen the mentality study and discipline supervision of the inventory team, take inventory of the posture of store service, strengthen the sense of responsibility, deeply understand that my negligence will bring a lot of inconvenience to other people’s work, and strengthen business learning. find out the packaging specifications and bar code types of goods, the responsibility is in place, detailed to the post, assessment to the person, the inventory error rate is directly included in the responsible person’s daily work assessment.
3. The quantity difference caused by the discrepancy between the weight of the goods distributed in the warehouse and the actual weight of the store.
When the goods are purchased and returned to the warehouse, the warehouse personnel shall carry out spot inspection strictly in accordance with the proportion of 1×10 of the quantity entered into the warehouse. In principle, the goods are re-stored according to the actual storage rather than according to the original purchase documents, so as to control the false appearance of the supplier’s low price and the difference in the actual weight of the store from the source. Store staff found that there are great differences in weighing goods in the process of receiving goods, so they should immediately communicate with the warehouse and make a written registration, and such cases should be incorporated into the information feedback form for processing.
4. the quantity difference caused by the untimely processing of system documents.
Each time the inventory results come out, the largest difference in inventory is caused by the lag in the processing of documents, which will directly increase the workload of inventory reconciliation, cause psychological panic among store staff and increase the difficulty of finding goods, resulting in negative personnel service in the later stage of inventory, which has a great negative impact. The proposed improvement methods are as follows:
1) the difference caused by the arrival of the warehouse
When distributing goods to stores, the commodity distribution center must adhere to the principle of step-by-step work flow and two reviews to ensure that the quantity out of the warehouse is consistent with the documents.
After verifying the discrepancy between the documents and the quantity caused by the warehouse distribution work, first of all, the warehouse has the obligation to find out the cause and follow up the solution, and secondly, the store should make a truthful registration and include it in the daily work assessment of the staff. If the quantity out of the warehouse is accurate and the quantity difference caused by the loading error during transportation, the logistics and distribution personnel have the obligation to recover the bad goods and return them to the store. if they cannot find them, the loss will be borne by the distribution personnel themselves.
Stores in the acceptance of the whole product and high-quality goods, should be carried out under the camera, in case of difference verification. If the store finds that there are too many goods and intends not to report them, it will be verified and dealt with according to improper conduct.
2) transfer / return differences between stores
When the store transfers or returns the goods, the transfer order Huanglian must go with the goods, and the transferred goods must be completely sealed and packed, and the transfer store, receiving store, total number of transferred goods and the serial number of this item must be clearly marked on the outer package. If there are no documents or the whole unsealed goods (scattered phenomenon), the transport personnel may refuse to take the goods; the receiving store is allowed to refuse to take the goods if it is found that the package is incomplete or without documents during the acceptance.
The goods can be taken away only after the original documents have been signed by both the transfer personnel and the transport personnel (the transfer personnel need to communicate with the consignee by telephone, inform the transporter’s name, and the number of dispatched pieces). When the transport personnel deliver the transferred goods to the receiving store, they have the right and obligation to ask the receiving personnel to call and transfer the store to reflect that the goods have been received and check the whole quantity. If you do not call to verify, it will be regarded as unreceived, and the responsibility shall be borne by the transporter.
3) document processing and follow-up
No matter it is returned or transferred, after the goods are transferred and confirmed that the other party receives the goods, the store must follow up the system document processing in time. The inventory difference is too big recently, many reasons are that the store did not follow up the document processing, did not do a good job of document management? How can we ensure that manual documents are processed timely and accurately? The previous document processing is not timely and accurate. I think there are the following reasons:
The red couplet documents were not sent to the office or warehouse in time.
The courier did not hand over the documents to the billing clerk.
The billing personnel did not process all the manual documents into system documents.
Solution:
Stores and billing personnel must have documents in and out of the detailed ledger.
When the courier takes away the red couplet of the document at the store, he must clearly register the date of taking the order, the name of the person, the total number of documents and the document number in the register book of the document desk.
When sending an order to the office or warehouse, the person who makes the order must truthfully register the receipt time, the store to which the document belongs, the total number of documents and the document number.
When dealing with store transfer documents or return documents, the invoice personnel should clearly note the manual document number on the notes of the system documents in case the store inquires.
Store staff need to take the initiative to check whether the documents have been processed systematically within a week of leaving the store, and if not, find out the reason and actively follow up. If the delivery staff has not delivered the order to promise when to deliver the order, and if the order person has not handled it, promise the latest order date to the store.
The store staff follow up the system documents and confirm that they have been dealt with on the original documents, and those that have not been dealt with should be communicated in a timely manner.
5. Quantitative differences caused by out-of-sync of commodity information
There are generally the following reasons why commodity information is out of sync:
1) the same kind of goods get rid of the old and bring forth the new (such as good man, old village head, Nutrition Express). New products have been sold in stores, but the Information Department has not yet established a file. This kind of situation now generally is to scan the old barcode sales first, and then follow up the information later. It is recommended that undocumented goods should not be sold in the store.
2) for the same commodity, the barcode price is different several times (such as scattered biscuits). It is recommended that the business purchase goods and the warehouse summarize the goods to ensure the consistency of commodity information. If the price is adjusted, try not to change the bar code.
3) when doing promotional activities, the barcode provided by the purchase is inconsistent with the barcode of the actual goods (such as promotion Apple: 88125, 88130; Ponkan and mandarin), or there is an international barcode. However, we must do homemade barcodes in our system to deal with sales (such as Dabao, knitwear, sale goods). To a large extent, this situation misleads employees to sell at high prices and low prices in the sales process.
4) Buy one get one free information of promotional activities: buy one get one free goods made during promotional activities (such as Wa orange slices, carved detergent, goods temporarily processed by suppliers), some suppliers are put into the actual inventory, some suppliers are not included in the actual inventory, and are stored according to the actual amount. In this situation, when doing activities, because the communication link is not smooth, some of the people who should be swept only do the signing to make a profit, while others do the sweeping to reduce the inventory. And after the event, will the stores resume single-piece sales or continue to buy one get one free?
The Ministry of Information and the Department of Operations did not give a clear statement to the store. So stores sell according to their own habitual thinking without asking for instructions, which leads to differences in inventory. It is suggested that when making such purchase orders for suppliers, the Information Department should clearly inform the stores in the WeChat group: what is the quantity of such goods in storage? What should be done in the sales process? Try to avoid this happening.
V. Summary
1. Store staff should strengthen their awareness of damage prevention and reduce the incidence of theft.
2. The store should register the daily bill entry and exit details, and those with a span of up to a week must be followed up by phone.
3, store allocation, receipt of goods to do a good job of document management, in case of special circumstances should have a written record and follow up the solution
4. The weighing goods in the warehouse and distribution store should be marked with bar code
5. the staff of the inventory group should enhance their sense of responsibility and business familiarity.
6. Operation Department, Purchasing Department and Information Department uniformly implement standards
7. Warehouse distribution / allocation to make the order consistent.
8. Take a routine inventory of cigarettes and high-value alcohol in stores at the end of each month
Ranking of Beverage Machinery Brands in 2016?
At present, the industry concentration of China’s packaging machinery manufacturing industry is not high, and the industry competition is more fierce. At present, there are more than 5000 packaging machinery manufacturers in China (including more than 300 large-scale enterprises, and dozens of turnkey engineering solutions suppliers for beverage factories. ), and there are now about 20 with output value and sales exceeding 100 million yuan. In terms of technology, although China’s packaging machinery manufacturing technology has made some progress in recent years, there is still a large gap compared with foreign countries, which is about 10 years behind the production technology of advanced countries. In 2010, China’s packaging machinery manufacturing industry realized product sales income of 17.705 billion yuan, an increase of 29.54% over the same period last year, total assets of 18.974 billion yuan, an increase of 15.53% over the same period last year, and a total industrial output value of 17.639 billion yuan, an increase of 26.35% over the same period last year. The product sales profit was 2.461 billion yuan, an increase of 24.65% over the same period last year; the total profit was 1.185 billion yuan, an increase of 3.95% over the same period last year At the end of the year, the number of employees was 39358, an increase of 3.98 percent over the same period. In February 2011, China Food and Packaging Machinery Industry Association issued the 12th five-year Development Plan of China Food and Packaging Machinery. According to the plan, by 2015, the total output value of China’s food and packaging machinery industry will grow to 400 billion yuan. According to industry statistics, by 2016, the list of China’s top 10 packaging machinery manufacturing companies is as follows: 1. Jiangsu New Meixing Packaging Machinery Co., Ltd. Xin Meixing, China’s high-end liquid (beverage) packaging machinery expert and leader. Committed to providing competitive and comprehensive solutions and services for global liquid beverage factories to create maximum value for customers. New Meixing has two major R & D and manufacturing plants, covering an area of more than 150000 square meters. It is the largest R & D and manufacturing base of liquid (beverage) packaging machinery in China. The company is headquartered in the national economic and technological development zone-Zhangjiagang Economic and technological Development Zone, adjacent to a number of highways and international airports, convenient transportation. The company’s business covers four major areas: beverages, alcoholic drinks, condiments and daily necessities. So far, it has successfully provided quality equipment and perfect services to famous liquid (beverage) factories at home and abroad, such as Coca-Cola, Pepsi, Danone, Nestl é, Wa, Kang Shifu, Suntory, Dali, Zhongfu, Unification, Yinlu, Yibao, Jingtian, Coconut, Oak, Canada and other famous liquid (beverage) factories at home and abroad. The products are also sold to Europe, Southeast Asia, the Middle East, America, Africa and more than 70 countries and regions. Corporate mission to help customers build an ideal factory, help employees realize their life dreams, global leading liquid packaging solution supplier values, integrity and responsibility, pursuit of excellence, customer achievement, win-win cooperation, respect for system, business philosophy, innovation, development, quality, market management philosophy, goal, responsibility, rules, contribution data, standardization, institutionalization, systematization 2. Hubei Jingshan Light Industry Machinery Co., Ltd. is the first paper products packaging machinery listed enterprise in China. After more than 50 years of painstaking efforts, it has grown into China’s largest paper packaging machinery research and development, manufacturing and export base. It is the world’s largest manufacturer of corrugated machinery and follow-up processing equipment. Jingshan Light Machinery is located in China’s ecological county-Jingshan County, Hubei Province, High-tech Development Zone, covering an area of 800 mu. It has more than 1200 sets of advanced processing equipment produced by the world’s top equipment manufacturers, such as Germany, Japan, South Korea and so on. Enterprises follow the business philosophy of “brand image, quality survival, service efficiency”, adhere to the boutique strategy, internationalization strategy, service strategy as the core, to create a “good and fast”three kings” brand image. Jingshan Light Machinery has obtained ISO9001 quality management system certification, North American ASME certification and EU CE certification. Through project management and node control, the quality management mode has been successfully transformed from post-inspection to prevention-based mode. combined with the three inspection system, a quality defect analysis model suitable for multi-variety and small batch mode is established. as a result, the one-time qualified rate of the key indicators of the four major hosts has reached 100%; through process innovation and process improvement, the expected life of tile rolls has been extended by more than 35 million meters. The company has a national technology center and a group of senior experts with more than 30 years of R & D experience, and a multi-disciplinary and multi-disciplinary doctoral research and development team. The technical director of the center is George, a former expert from Langston Company in the United States. Robert。 Mills is responsible for an average of more than 40 R & D projects per year. The company’s products continue to move towards the international route of “high speed, high efficiency, low energy consumption, intelligence and large breadth”, and always maintain the leading technical level in the industry. 3. Guangzhou Dayilong Packaging Machinery Co., Ltd. Guangzhou Dayilong Packaging Machinery Co., Ltd. the predecessor of Guangzhou Dayilong Packaging Machinery Co., Ltd. (A shares listed on the Shenzhen Stock Exchange on January 30th, 2008) was established in 1998 and formally restructured into a joint stock limited company in 2006, with a registered capital of 114 million yuan. It is a leading enterprise in China’s beverage packaging machinery manufacturing industry. The company is a leading equipment supplier in China’s beverage packaging industry, providing comprehensive solutions for beverage factories, including former treatment, bottle blowing, filling, to secondary packaging, whole line and stand-alone equipment. The company independently has a number of leading technologies and equipment. Including the first domestic automatic rotary PET bottle blowing machine, Asia’s highest speed rotary 5-gallon bottled water filling equipment, domestic leading PET bottle beverage filling production line and secondary packaging equipment. The company has successfully become the certified supplier of international companies such as Coca-Cola, Pepsi, Danone of France, Shengli Group and so on. and for Wa, Robust, coconut, Jianlibao, Zijiang, Zhongfu and other domestic well-known beverage brands to provide excellent equipment and perfect services. 4. Zhongshan Songde Packaging Machinery Co., Ltd. (formerly known as Zhongshan Songde Packaging Machinery Co., Ltd.) was founded in 1997 and listed on the Shenzhen Stock Exchange in 2011. The company is committed to providing high-quality gravure printing, flexo printing equipment and supporting technical support for users in packaging printing, decorative printing and other related fields; the products mainly include folding carton, flexible packaging and decorative material printing and processing equipment, and carton preprinting equipment; Songde not only strives to develop complete sets of printing equipment with international standards, but also pays more attention to providing systematic solutions. After more than 10 years of rapid development, Songde Machinery Co., Ltd. has become a leading manufacturing service provider in China’s printing processing equipment industry. it is currently the fastest growing and largest private enterprise in China’s gravure and flexo equipment manufacturing industry. The company manages and promotes enterprise progress according to international company standards, actively promotes the product development concept of “environmental protection, health and safety” in the international packaging and printing industry, and invests more than 10 million every year in product innovation based on the potential needs of customers. developed and sold a series of high-quality printing equipment with international standards. It is praised by customers for providing high practical, personalized, systematic and complete production line design and quality service for first-class cigarette packaging, aseptic packaging, flexible packaging, wood grain paper and carton pre-printing processing at home and abroad. Excellent non-standard design ability, excellent special process requirements and excellent process innovation ability, created a strong comprehensive strength of Songde! Songde complete sets of machinery not only occupy a large market share in China, but also win the trust of more and more experts in the international market and establish a good international reputation. 5. Shaanxi Beiren Printing Machinery Co., Ltd. Shaanxi Beiren Printing Machinery Co., Ltd. is a professional packaging and printing equipment manufacturing enterprise with a history of more than 40 years.
With more than 40 years of development and accumulation, we have forged a professional R & D team with strong innovative ability and high technical quality. The company has an international advanced level, excellent processing and precision testing equipment. First in the industry through the GB/T19001-2008 quality management system, GB/T24001-2004 environmental management system, GB/T28001-2001 occupational health and safety management system certification, a variety of products passed the CE certification. With the pursuit of “green, environmental protection, high efficiency and humanization”, the company is committed to providing users with quality products and services. Mainly produces plastic, paper gravure press; flexographic press; compound machine, coating machine, cutting machine and other complete sets of equipment. The leading product group gravure press is “Shaanxi famous Brand products”, “Chinese Packaging Brand products” and “National customer satisfaction products”. The products sell well in China, and sell in more than 20 countries and regions, such as Europe, Southeast Asia and so on. 6. Hualian Machinery Group Co., Ltd. Hualian Machinery Group Co., Ltd. was founded in 1989, is a scientific research, design, manufacturing and sales as one of the group company, packaging machinery as the leading industry, is the executive director of the China Packaging Federation. China packaging excellent enterprises, Zhejiang high-tech enterprises, undertake the National Torch Plan project. The enterprise has passed the international quality management system certification IS09001:2000 and EU CE certification. The series of packaging machinery products manufactured by the company are rated as China’s famous packaging products, and Hualian Packaging Machinery R & D Center is listed as Zhejiang Provincial High-tech Research and Development Center. The group consists of Hualian Machinery Group Co., Ltd., Beijing Overson Packaging Machinery Co., Ltd., Hualian Machinery Group Shanghai sales Co., Ltd., Hualian Machinery Group Sichuan sales Co., Ltd., Jiangsu Hualian Machinery Group Wenzhou sales Co., Ltd., Hualian Machinery Group Wenzhou Packaging Machinery Co., Ltd., Hualian Machinery Group Import and Export Co., Ltd., Hualian Machinery Group Automation equipment Co., Ltd., Hualian Machinery Group Huabang Packaging Machinery Co., Ltd., Hualian Machinery Group Light Industry Machinery Co., Ltd., Hualian Machinery Group Wenzhou Cold work Machinery Co., Ltd. Shenzhen Washington Lianqiang Packaging Machinery Co., Ltd. (Shenzhen Hualian Packaging Machinery) is composed of Shenzhen Hualian Packaging Machinery Co., Ltd. (Shenzhen Hualian Packaging Machinery Co., Ltd.). The industrial park in Wenzhou covers an area of 22000 square meters and a construction area of 27000 square meters. The packaging machinery products that the group has formed and put into large-scale production are: origami machine series, carton automatic packaging production line series, carton molding machine series, automatic packing machine series, automatic sealing machine series, automatic binding machine series, automatic winding packaging machine series, automatic palletizing robot series; heavy bag automatic packaging production line series, heavy bag automatic packaging machine series. And vacuum packaging machine and true air conditioning packaging machine series, sealing machine series, tight packaging machine series, heat shrinkable packaging machine series, automatic packaging machine series, automatic coding machine series and so on more than 200 packaging machinery products. 7. Xunjie Machinery equipment Co., Ltd. is a packaging machinery brand jointly built by Jinan Xunjie, Wuhan Xunjie and Jinan Dongtai. The Group is committed to the design, development, manufacture and sales of packaging machinery and packaging equipment. It has passed the ISO9001:2000 system certification, and the series of filling and sealing machines and filling machines have passed the CE certification. The main products such as tail sealing machine, filling machine, electromagnetic induction sealing machine, labeling machine and other products have been widely used in pharmaceutical, daily chemical, food, pesticide, lubricating oil and other industries, and some of the products are exported to Europe, America, Middle East, Southeast Asia and other regions. The company has professional and technical personnel, engineers, and sales after-sales service personnel, forming a high-quality young team full of team innovation spirit. The company has always been to “people-oriented, leading science and technology, integrity management, create well-known brands” for the purpose, as always, to provide customers with reliable products, perfect services, common development, and create good results. 8. Spark Packaging Machinery Co., Ltd. Zhengzhou Spark Packaging Machinery Co., Ltd. is a scientific research, production, sales and service in one of the high-tech enterprises, the company has more than 200 employees. Is a professional manufacturer engaged in food, pharmaceutical, chemical packaging machinery, filling machinery, unmanned intelligent packaging production line. Spark people adhering to the “integrity, responsibility, service, development” business purpose, to “improve enterprise packaging efficiency” as the corporate mission; to create “the first brand of packaging machinery industry” as the corporate vision. Use “scientific and technological innovation” to guide the operation and development of enterprises, and promote the development of brands with the results of the construction of corporate culture. Spark machinery comes from foreign high-end packaging equipment, with reference to foreign advanced packaging technology, and then develops packaging machinery in line with national conditions and application habits. Spark absorbs foreign advanced technology and cooperates with domestic well-known university machinery research institutes to hire famous experts in the industry to quickly transform the latest scientific research achievements into productivity and gradually push them to the market. At present, Spark Company has more than ten product intellectual property rights and patented technology. Let customers win more space, carry out cost accounting, market analysis, design and planning for customers, send engineers to install and debug, and train operators free of charge to ensure the production of qualified and high-quality products. 9. Nanjing light industrial machinery group Nanjing light industrial machinery group is a large-scale light industrial machinery enterprise relying on the leading products of beer and beverage filling equipment and integrating product research and development, manufacturing, operation and sales, technical service and other functions. the number of employees exceeds 6000. The group mainly produces beer filling equipment, beverage filling and bottle blowing equipment, food packaging equipment, pipe equipment, electroplating equipment, electronic components automatic plug-in equipment, high-speed cold extrusion equipment, hydraulic bending equipment and hydroforming equipment, as well as restaurants, tourism and catering. Among them: the leading product beer, beverage filling equipment in China’s food packaging industry, the technology is in the domestic leading position and close to the international advanced level. The company’s products are mainly direct sales, and its market share ranks first in the same industry in China for ten years in a row, and its products are exported to Asia, Africa and Europe. Nanjing Light Industry Machinery Group, which belongs to China Building Materials Light Industry Machinery Corporation, passed the ISO-9001 quality system certification in June 1997 and successfully passed the replacement certification in 2002. As the only enterprise in China’s beer and beverage equipment industry that won the “May 1 Labor Certificate”, it was commended by the all-China Federation of Trade unions. Nanjing Light Industry Machinery Group has been named “Jiangsu Civilization Unit” for five consecutive years, and has recently been named “National Machinery Industry Civilization Unit” by China Machinery Federation. “Nanjing Light Machinery Group Design Institute” has been recognized as “Jiangsu Enterprise Technology Center” and named as the national CAD and CIMS system application demonstration enterprise by the Ministry of Science and Technology. 10. Qingdao Huachi Packaging Machinery Co., Ltd. Qingdao Huachi Machinery Manufacturing Co., Ltd. was founded in 1955, covers an area of 38000 square meters, more than 300 employees, is a high-tech enterprise in Qingdao, the Ministry of Agriculture to create a famous brand key enterprises, in the same industry first through the ISO9001 international quality system certification. The company has strong technical force, advanced equipment, perfect management, specializing in the production of edge jacquard knitting machine, paste pocket complete sets of production equipment and so on. Article Source: Sina Financial time: April 1, 2017
What are the advantages of the all-in-one blowing machine with bottle blowing, filling and capping over ordinary traditional filling machines?
In 2009, China’s first 36000 bottle / hour high-speed blowing and filling all-in-one machine equipment was manufactured in Zhangjiagang, Suzhou, Jiangsu Province, for reasons of technology and technology.
The all-in-one blowing and filling machine is a filling mechanical equipment which integrates bottle blowing, filling and capping.
It mainly reduces the intermediate links such as transmission, empty bottle treatment, stacking and storage processes, improves the hygienic conditions of packaging, reduces cross-pollution, improves the overall operation efficiency, and greatly reduces energy consumption, thus reducing the comprehensive production cost of beverage production enterprises.
Suitable for pure water, carbonated drinks, fruit juices, tea, liquid milk, liquid condiments and daily necessities packed in PET bottles.
Compared with the traditional filling machinery, the outstanding points of the all-in-one blowing and filling machine are as follows:
Stable infrared heating system and independent heat balance regulation
The device makes the temperature of the bottle preform uniform when heating, and the process is good.
Good consistency and stability to further improve the rate of finished products.
A specially designed secondary blowing system for real-time monitoring of each mold
The pressure change curve in the forming process of cavity bottle is the process.
Adjust to provide timely and accurate real-time parameters, greatly convenient for operation
As a worker to adjust the process parameters and ensure the shaping quality of the bottle at the same time.
The quantity is stable.
High-speed, high-precision diaphragm filling valve: independent of liquid
The return passage of the cylinder is replaced in the PET bottle during the filling process.
The air does not enter the tank to avoid secondary pollution; equipped with
There is a cleaning cup, which can realize online CIP cleaning.
At present, the industry concentration of China’s packaging machinery manufacturing industry is not high, and the industry competition is more fierce. At present, there are more than 5000 packaging machinery manufacturers in China (including more than 300 enterprises of large scale), but only about 20 have an output value and sales of more than 100 million yuan. In terms of technology, although China’s packaging machinery manufacturing technology has made some progress in recent years, there is still a large gap compared with foreign countries, which is about 20 years behind the production technology of advanced countries. In 2010, China’s packaging machinery manufacturing industry realized product sales income of 17.705 billion yuan, an increase of 29.54% over the same period last year, total assets of 18.974 billion yuan, an increase of 15.53% over the same period last year, and a total industrial output value of 17.639 billion yuan, an increase of 26.35% over the same period last year. The product sales profit was 2.461 billion yuan, an increase of 24.65% over the same period last year; the total profit was 1.185 billion yuan, an increase of 3.95% over the same period last year At the end of the year, the number of employees was 39358, an increase of 3.98 percent over the same period. In February 2011, China Food and Packaging Machinery Industry Association issued the 12th five-year Development Plan of China Food and Packaging Machinery. According to the plan, by 2015, the total output value of China’s food and packaging machinery industry will grow to 400 billion yuan.
According to industry statistics, as of mid-2015, the list of China’s top 10 packaging machinery manufacturing companies is as follows:
1. Jiangsu New Meixing Packaging Machinery Co., Ltd.
New Meixing, China’s high-end liquid (beverage) packaging machinery expert and leader. Committed to providing competitive and comprehensive solutions and services for global liquid beverage factories to create maximum value for customers. New Meixing has two major R & D and manufacturing plants, covering an area of more than 150000 square meters. It is the largest R & D and manufacturing base of liquid (beverage) packaging machinery in China. The company is headquartered in the national economic and technological development zone-Zhangjiagang Economic and technological Development Zone, adjacent to a number of highways and international airports, convenient transportation.
The company’s business covers four major areas: beverages, alcoholic drinks, condiments and daily necessities. So far, it has successfully provided quality equipment and perfect services to famous liquid (beverage) factories at home and abroad, such as Coca-Cola, Pepsi, Danone, Nestl é, Wa, Kang Shifu, Suntory, Dali, Zhongfu, Unification, Yinlu, Yibao, Jingtian, Coconut, Oak, Canada and other famous liquid (beverage) factories at home and abroad. The products are also sold to Europe, Southeast Asia, the Middle East, America, Africa and more than 70 countries and regions.
Enterprise mission
Help customers build ideal factories and help employees realize their life dreams
Enterprise vision
The world’s leading provider of liquid packaging solutions
Values
Honesty and responsibility, pursuit of excellence, customer achievement, win-win cooperation and respect for the system
Management idea
Innovation drives development quality to win the market
Management concept
Stress goals, responsibilities, rules and contributions
two。 Hubei Jingshan Light Industry Machinery Co., Ltd.
Jingshan Light Machinery is the first listed enterprise of paper packaging machinery in China. After more than 50 years of painstaking efforts, it has grown into the largest research and development, manufacturing and export base of paper packaging machinery in China. Is the world’s largest manufacturer of corrugated machinery and follow-up processing equipment.
Jingshan Light Machinery is located in China’s ecological county-Jingshan County, Hubei Province, High-tech Development Zone, covering an area of 800 mu. It has more than 1200 sets of advanced processing equipment produced by the world’s top equipment manufacturers, such as Germany, Japan, South Korea and so on.
Enterprises follow the business philosophy of “brand image, quality survival, service efficiency”, adhere to the boutique strategy, internationalization strategy, service strategy as the core, to create a “good and fast”three kings” brand image.
Jingshan Light Machinery has obtained ISO9001 quality management system certification, North American ASME certification and EU CE certification. Through project management and node control, the quality management mode has been successfully transformed from post-inspection to prevention-based mode. combined with the three inspection system, a quality defect analysis model suitable for multi-variety and small batch mode is established. as a result, the one-time qualified rate of the key indicators of the four major hosts has reached 100%; through process innovation and process improvement, the expected life of tile rolls has been extended by more than 35 million meters.
The company has a national technology center and a group of senior experts with more than 30 years of R & D experience, and a multi-disciplinary and multi-disciplinary doctoral research and development team. The technical director of the center is George, a former expert from Langston Company in the United States. Robert。 Mills is responsible for an average of more than 40 R & D projects per year. The company’s products continue to move towards the international route of “high speed, high efficiency, low energy consumption, intelligence and large breadth”, and always maintain the leading technical level in the industry.
Guangzhou Dayilong Packaging Machinery Co., Ltd. (A shares were listed on the Shenzhen Stock Exchange on January 30, 2008) the predecessor was Guangzhou Dayilong Packaging Machinery Co., Ltd., which was established in 1998 and formally transformed into a joint stock limited company in 2006.
4. Zhongshan Songde packing Machinery Co., Ltd.
Songde Machinery Co., Ltd. (formerly known as Zhongshan Songde Packaging Machinery Co., Ltd.) was founded in 1997 and listed on the Shenzhen Stock Exchange in 2011. The company is committed to providing high-quality gravure printing, flexo printing equipment and supporting technical support for users in packaging printing, decorative printing and other related fields; the products mainly include folding carton, flexible packaging and decorative material printing and processing equipment, and carton preprinting equipment; Songde not only strives to develop complete sets of printing equipment with international standards, but also pays more attention to providing systematic solutions.
After more than 10 years of rapid development, Songde Machinery Co., Ltd. has become a leading manufacturing service provider in China’s printing processing equipment industry. it is currently the fastest growing and largest private enterprise in China’s gravure and flexo equipment manufacturing industry. The company manages and promotes enterprise progress according to international company standards, actively promotes the product development concept of “environmental protection, health and safety” in the international packaging and printing industry, and invests more than 10 million every year in product innovation based on the potential needs of customers. developed and sold a series of high-quality printing equipment with international standards. It is praised by customers for providing high practical, personalized, systematic and complete production line design and quality service for first-class cigarette packaging, aseptic packaging, flexible packaging, wood grain paper and carton pre-printing processing at home and abroad. Excellent non-standard design ability, excellent special process requirements and excellent process innovation ability, created a strong comprehensive strength of Songde! Songde complete sets of machinery not only occupy a large market share in China, but also win the trust of more and more experts in the international market and establish a good international reputation.
5. Shaanxi Beiren Printing Machinery Co., Ltd.
Shaanxi Beiren Printing Machinery Co., Ltd. is a professional packaging and printing equipment manufacturing enterprise with a history of more than 40 years, high-tech enterprises in Shaanxi Province and national customer satisfaction enterprises.
With more than 40 years of development and accumulation, we have forged a professional R & D team with strong innovative ability and high technical quality. The company has an international advanced level, excellent processing and precision testing equipment. First in the industry through the GB/T19001-2008 quality management system, GB/T24001-2004 environmental management system, GB/T28001-2001 occupational health and safety management system certification, a variety of products passed the CE certification.
With the pursuit of “green, environmental protection, high efficiency and humanization”, the company is committed to providing users with quality products and services. Mainly produces plastic, paper gravure press; flexographic press; compound machine, coating machine, cutting machine and other complete sets of equipment. The leading product group gravure press is “Shaanxi famous Brand products”, “Chinese Packaging Brand products” and “National customer satisfaction products”. The products sell well in China, and sell in more than 20 countries and regions, such as Europe, Southeast Asia and so on.
6. Hualian Machinery Group Co., Ltd.
Hualian Machinery Group was founded in 1989, is a scientific research, design, manufacturing and sales as one of the group company, with packaging machinery as the leading industry, is the executive director of China Packaging Federation, China packaging excellent enterprises, Zhejiang Province high-tech enterprises, undertake the National Torch Plan project. The enterprise has passed the international quality management system certification IS09001:2000 and EU CE certification. The series of packaging machinery products manufactured by the company are rated as China’s famous packaging products, and Hualian Packaging Machinery R & D Center is listed as Zhejiang Provincial High-tech Research and Development Center.
The group consists of Hualian Machinery Group Co., Ltd., Beijing Overson Packaging Machinery Co., Ltd., Hualian Machinery Group Shanghai sales Co., Ltd., Hualian Machinery Group Sichuan sales Co., Ltd., Jiangsu Hualian Machinery Group Wenzhou sales Co., Ltd., Hualian Machinery Group Wenzhou Packaging Machinery Co., Ltd., Hualian Machinery Group Import and Export Co., Ltd., Hualian Machinery Group Automation equipment Co., Ltd., Hualian Machinery Group Huabang Packaging Machinery Co., Ltd., Hualian Machinery Group Light Industry Machinery Co., Ltd., Hualian Machinery Group Wenzhou Cold work Machinery Co., Ltd. Shenzhen Washington Lianqiang Packaging Machinery Co., Ltd. (Shenzhen Hualian Packaging Machinery) is composed of Shenzhen Hualian Packaging Machinery Co., Ltd. (Shenzhen Hualian Packaging Machinery Co., Ltd.). The industrial park in Wenzhou covers an area of 22000 square meters and a construction area of 27000 square meters.
The packaging machinery products that the group has formed and put into large-scale production are: origami machine series, carton automatic packaging production line series, carton molding machine series, automatic packing machine series, automatic sealing machine series, automatic binding machine series, automatic winding packaging machine series, automatic palletizing robot series; heavy bag automatic packaging production line series, heavy bag automatic packaging machine series. And vacuum packaging machine and true air conditioning packaging machine series, sealing machine series, tight packaging machine series, heat shrinkable packaging machine series, automatic packaging machine series, automatic coding machine series and so on more than 200 packaging machinery products.
7. Xunjie Machinery equipment Co., Ltd.
Fast packaging machinery is a brand of packaging machinery jointly built by Jinan Xunjie, Wuhan Xunjie and Jinan Dongtai. The Group is committed to the design, research, development, manufacture and sales of packaging machinery and packaging equipment. It has passed the ISO9001:2000 system certification, and the series of filling and sealing machines and filling machines have passed the CE certification. The main products such as tail sealing machine, filling machine, electromagnetic induction sealing machine, labeling machine and other products have been widely used in pharmaceutical, daily chemical, food, pesticide, lubricating oil and other industries, and some of the products are exported to Europe, America, Middle East, Southeast Asia and other regions.
The company has professional and technical personnel, engineers, and sales after-sales service personnel, forming a high-quality young team full of team innovation spirit. The company has always been to “people-oriented, leading science and technology, integrity management, create well-known brands” for the purpose, as always, to provide customers with reliable products, perfect services, common development, and create good results.
8. Spark packaging machinery co., Ltd.
Zhengzhou Xinghuo Packaging Machinery Co., Ltd. is a high-tech enterprise integrating scientific research, production, sales and service, with more than 200 employees. Is a professional manufacturer engaged in food, pharmaceutical, chemical packaging machinery, filling machinery, unmanned intelligent packaging production line. Spark people adhering to the “integrity, responsibility, service, development” business purpose, to “improve enterprise packaging efficiency” as the corporate mission; to create “the first brand of packaging machinery industry” as the corporate vision. Use “scientific and technological innovation” to guide the operation and development of enterprises, and promote the development of brands with the results of the construction of corporate culture.
Spark machinery comes from foreign high-end packaging equipment, with reference to foreign advanced packaging technology, and then develops packaging machinery in line with national conditions and application habits. Spark absorbs foreign advanced technology and cooperates with domestic well-known university machinery research institutes to hire famous experts in the industry to quickly transform the latest scientific research achievements into productivity and gradually push them to the market. At present, Spark Company has more than ten product intellectual property rights and patented technology. Let customers win more space, carry out cost accounting, market analysis, design and planning for customers, send engineers to install and debug, and train operators free of charge to ensure the production of qualified and high-quality products.
9. Nanjing Light Industry Machinery Group
Nanjing Light Industrial Machinery Group is a large-scale light industrial machinery enterprise with more than 6000 employees, relying on the leading products of beer and beverage filling equipment, integrating product research and development, manufacturing, operation and sales, technical service and other functions. The group mainly produces beer filling equipment, beverage filling and bottle blowing equipment, food packaging equipment, pipe equipment, electroplating equipment, electronic components automatic plug-in equipment, high-speed cold extrusion equipment, hydraulic bending equipment and hydroforming equipment, as well as restaurants, tourism and catering. Among them: the leading product beer, beverage filling equipment in China’s food packaging industry, the technology is in the domestic leading position and close to the international advanced level. The company’s products are mainly direct sales, and its market share ranks first in the same industry in China for ten years in a row, and its products are exported to Asia, Africa and Europe.
Nanjing Light Industry Machinery Group, which belongs to China Building Materials Light Industry Machinery Corporation, passed the ISO-9001 quality system certification in June 1997 and successfully passed the replacement certification in 2002. As the only enterprise in China’s beer and beverage equipment industry that won the “May 1 Labor Certificate”, it was commended by the all-China Federation of Trade unions. Nanjing Light Industry Machinery Group has been named “Jiangsu Civilization Unit” for five consecutive years, and has recently been named “National Machinery Industry Civilization Unit” by China Machinery Federation. “Nanjing Light Machinery Group Design Institute” has been recognized as “Jiangsu Enterprise Technology Center” and named as the national CAD and CIMS system application demonstration enterprise by the Ministry of Science and Technology.
10. Qingdao Huachi packing Machinery Co., Ltd.
Qingdao Huachi Machinery Manufacturing Co., Ltd. was founded in 1955, covers an area of 38000 square meters, more than 300 employees, is a high-tech enterprise in Qingdao, the Ministry of Agriculture to create a famous brand key enterprises, in the same industry first through the ISO9001 international quality system certification. The company has strong technical force, advanced equipment, perfect management, specializing in the production of edge jacquard knitting machine, paste pocket complete sets of production equipment and so on.
Article source: Sina Finance
Time: 01 / 07 / 2015
What are the brands of blueberry wine?
Top Ten Brands list of Blueberry Wine
Based on big data, the top 10 brands of blueberry wine in 2020 were selected according to brand evaluation and sales volume. The top 10 are:
So much for the introduction of Wa sealing machine. Thank you for taking the time to read the contents of this site. Don’t forget to look for more information about Wa packing box and Wa sealing machine on this site.
YanMao palletizer
