The action of the box opener is to collect the box, shape, fold the cover and seal the bottom as a whole. First of all, put the flat carton on the storage tank (which can store 100 cartons), suck the carton out of the tank through the sucker, shape the carton at the same time, fold the front and back and the left and right cover, and finally complete the bottom sealing of the tape. The whole action is completed automatically and controlled by P.L.C + touch display screen. It is equipped with a safety device which can alarm in advance and stop automatically when there is no material. It is greatly convenient to operate, manage, reduce production personnel and labor intensity, and is an indispensable equipment for automatic scale production.
The automatic box opener automatically completes the opening, forming and folding of the bottom folded leaves. And now complete the lower part of the tape paste, the machine will automatically open the cardboard box board, the bottom of the box is converted according to a certain procedure, and sealed with tape and transported to the special equipment of the packing machine. two。 Features: 1. This machine adopts P.L.C + display screen control, which is greatly convenient for operation, management and reduction. Professional precision design, the whole machine adopts cam continuous system, the operation of the machine is accurate and stable. Break through the design of the traditional tape sticker, close the box, have a good smoothing effect of the tape, never jump the belt (or adopt hot melt glue) molding and seal the box with stepless speed control, the speed can be adjusted arbitrarily, and the horizontal design is adopted to save man-hour carton storage, which can be supplemented at any time.
It is widely used in food, medicine, dairy, beverage, daily chemical, electronics and other fields.
Classification of box openers:
Vertical box opener (low speed 12 cases / min GPK-40, medium speed 18 cases / min GPK-40H18)
Horizontal box opener (25 cases / min GPK-40H25 at medium speed, 40 cases / min GPK-40H40 at high speed)
What are the maintenance methods for the failure of the automatic box opener?
The fault maintenance of the box opener is usually caused by the usual simple illegal operation, as the operator must simply deal with some of the faults of the automatic box opener. Here Jiajun box opener factory teaches you how to solve the fault of the automatic box opener.
First: cassette processing
When the belt is stuck in the middle of the roller, or when there is a foreign body stuck and cannot be removed, disassemble the washer of the hexagonal nut and loosen the two M5 countersunk screws on the middle connecting shaft. Because the two screws are fixed in the gap part of the connecting shaft, the screws must be turned up; remove the connecting shaft, pick up the engine, and remove the clamp. Finally, it can be assembled and restored according to the above way, and pay attention to the gap between the nut and the L-shaped curved plate at 0.3-0.5mm.
Second。 Do not cut the belt after being tied up.
There are many situations that can cause this situation, such as: 1. The adjustment of tension is too tight; 2. If the slipper or skid belt has oil, it must be removed and wiped off. The belt is too tight, lower the belt drive seat, or adjust the motor back.
Third, the bonding effect is poor.
1. The temperature is too high or not enough, sometimes the special tape has poor stickiness, and the temperature must be very accurate.
two。 The use voltage is not enough, and the voltage of many factories is often insufficient. If the extension cord or cable is used again, resulting in a voltage drop, the previously adjusted temperature becomes lower, or even burns when the motor is tied up, so avoid using cable lines as far as possible. If you must use an extension cord, you must connect a thicker rather than too long wire.
3. The electrothermal steel sheet is too high and too low, or left to right, so it touches the upper and lower PP belts, or the left and right cutters, and cannot enter the heating, which should be adjusted according to the situation.
4. The smoke exhaust micro-fan malfunctioned, making the temperature too high.
Fourth. The fully automatic box opener can not be taken out.
In this case, first check whether the “belt length adjustment” is at “0”, and then see if the belt piercing process is correct; if not, see if the foreign body is stuck near the belt roller, which will also cause this situation.
In addition, the faults of the box opener are fixed in several aspects, we can pay more attention to maintenance at ordinary times, and do a good job of daily maintenance.
What is the box opener?
The automatic box opener automatically completes the opening, forming and folding of the bottom folded leaves. And now complete the lower part of the tape paste, the machine will automatically open the cardboard box board, the bottom of the box is converted according to a certain procedure, and sealed with tape and transported to the special equipment of the packing machine.
The main principle of the box opener: first, put the flat carton on the storage tank (which can store 100 cartons), suck the carton out of the trough through the sucker, shape the carton at the same time, fold the front and back and left and right covers, and finally complete the bottom sealing of the tape. The whole action is completed automatically.
Features of the opening machine equipment: vertical cardboard storage mode is adopted, which can be supplemented at any time without stopping; it is suitable for packaging of the same carton size at the same time, if the carton specification needs to be changed, it can be manually adjusted and used (the time required is only 1: 2 minutes); this machine adopts reasonable design, suction box, forming and bottom sealing are all handled automatically in one go. The machine performance is precise and durable, the operation process is non-vibration, the operation is stable and long life; this machine adopts PLC+ man-machine interface display screen control, high performance, high speed, high efficiency; carton sealing tape corner length 50~70mm, customizable 80mm, 100mm; can be used stand-alone or with automatic packaging assembly line.
Equipment parameters of box opener:
Work rate: single phase 220V, 50Hz/60Hz, 600W
Air pressure: 6 kg / square centimeter
Tape width: 4.8-6.0cm
Molding speed: 12 cases / min
Carton size: maximum size: L550mm W400mm H400mm
Minimum size: L200mm W150mm H100mm
Machine weight: about 400kg
With or without tape and no cardboard box alarm function
If you need more details, you can also click: automatic box opener (for reference)
What exactly is the function of the box opener?
The box opener is a fully automatic equipment which automatically operates the carton, converts the bottom of the carton according to a certain procedure, and seals it with adhesive tape and transmits it to the packing machine through the conveyor belt. The machine has a high degree of automation and simple operation, and can automatically complete a series of work, such as box picking, forming, folding cover, bottom sealing and so on. It has developed rapidly in the packaging machinery industry. The workload of operators and the number of operators are reduced. At the same time, the occupation space of machinery is reduced, and the cost of purchasing other auxiliary machinery is saved. Save the cost of workers and improve the production efficiency of enterprises. Learn more about automatic box opener Shanghai trek intelligent equipment
What is a fully automatic carton forming machine
What is a fully automatic carton forming machine? The fully automatic carton forming machine is what we call the box opener. Do you understand the automatic carton forming machine? In the process of packaging production, a series of operations such as out of the box, forming, folding and so on can be produced automatically, and the tape seal at the bottom of the carton can be realized at the same time, according to the packing procedure from the distributed sealing belt to the packaging device, the packaging device is essential for the modernization of large-scale production automation enterprises.
This is the end of the introduction of fully automatic high-speed box openers and manufacturers of full-automatic high-speed box openers. I wonder if you have found the information you need? If you want to know more about this, remember to collect and follow this site.
YanMao palletizer
