High-quality small inner and outer bag packaging machine is a kind of equipment widely used in modern packaging industry. It can automatically complete a series of operations such as bag picking, bag opening, bag filling, bag sealing and so on, which greatly improves the packaging efficiency and packaging quality. However, in the process of installation, if you do not pay attention to some key steps, it will affect the effect of the packaging machine. Next, we will reveal the key steps for the installation of high-quality small inner and outer bag packaging machines.
I. preparatory work before installation
Before installing a high-quality small inner and outer bag packing machine, some preparatory work needs to be done to ensure that the installation is carried out smoothly. First of all, we need to make sure that the model, specification and quantity of the packing machine are consistent with the order. Secondly, the corresponding power supply, air source and ground need to be prepared at the installation site. Finally, a comprehensive inspection of the packaging machine is needed to ensure that the parts of the packaging machine are intact.
2. Installation of packaging machine
1. Installation base
First of all, you need to install the base, which should be placed on the horizontal ground. When installing the base, the base needs to be bolted to the ground to ensure that it will not move because of the vibration of the packaging machine.
two。 Install the transmission system
The transmission system is one of the core components of the packaging machine, which needs to be installed on the base. When installing the transmission system, we need to pay attention to the installation direction and position of the transmission system to ensure the good coordination between the transmission system and other parts.
3. Install the feeding system
The feeding system is another core component of the packaging machine and needs to be installed above the transmission system. When installing the feeding system, it is necessary to pay attention to the installation direction and position of the feeding system to ensure a good coordination between the feeding system and the transmission system.
4. Install the control system
The control system is the brain of the packaging machine and needs to be installed on top of the packaging machine. When installing the control system, we need to pay attention to the installation direction and position of the control system to ensure that the control system cooperates well with other components.
Third, the debugging of packaging machine
After the installation is completed, it is necessary to conduct a comprehensive debugging of the packaging machine to ensure that the functions of the packaging machine are normal. When debugging, it is necessary to operate according to the operating instructions of the packaging machine and check whether the functions of the packaging machine are normal one by one.
Fourth, the use of packaging machine
After the completion of the debugging of the packaging machine, you can begin to use the packaging machine for production. When using the packaging machine, we need to operate according to the operating instructions of the packaging machine, and pay attention to the maintenance and maintenance of the packaging machine to ensure the long-term and stable operation of the packaging machine.
The above are the key steps for the installation of high-quality small inner and outer bag packaging machine. If you encounter problems in the installation process, you can contact the packaging machine manufacturer for consultation and solution at any time. I hope the above content can be helpful to everyone.
YanMao palletizer
