In modern production, bag packaging machine is one of the indispensable equipment. The double-out-bag packaging machine has been widely used in some large enterprises. However, for enterprises that use double-bag packaging machine for the first time, the installation process is a very critical task. In the process of installation, if there are problems, it will have a negative impact on the production of the enterprise. So, how to ensure the successful installation of the double-bag packaging machine?
I. preparatory work
Before the installation of the double-bag packaging machine, you need to make preparations first. This includes the inspection and cleaning of the equipment, as well as the cleaning and finishing of the work area. At the same time, you also need to prepare the necessary tools and materials to ensure that the installation process can proceed smoothly.
Second, installation steps
1. Determine the installation location
Before installing the double-out-bag packaging machine, you need to determine its installation location. This location needs to meet the following requirements:
(1) there is sufficient space to accommodate the equipment.
(2) it can meet the power and gas source requirements of the equipment.
(3) it is convenient to maintain and maintain the equipment.
two。 Install the machine rack
Install the machine frame in the predetermined position and fix it. In the process of installation, it is necessary to pay attention to the level and stability of the machine frame.
3. Install conveyor belt
Install the conveyor belt on the machine rack and fix it. In the process of installation, attention should be paid to the tension and position of the conveyor belt.
4. Install the control box
Install the control box on the machine rack and fix it. During the installation process, it is necessary to pay attention to the connection between the power supply of the control box and the signal line.
5. Install the gas source system
Install the air source system on the machine rack and fix it. In the process of installation, attention should be paid to the connection and debugging of the gas source system.
6. Install the packaging head
Install the packaging head on the machine rack and fix it. In the process of installation, we need to pay attention to the position and adjustment of the packaging head.
7. Debugging equipment
After the installation is complete, the equipment needs to be debugged. This includes debugging and testing the conveyor belt, gas source system, packaging machine head, etc., to ensure the normal operation of the equipment.
Third, how to judge whether the installation is successful or failed
After the installation of the double-bag packaging machine is completed, a test is needed to determine whether the installation is successful or not. Here are several aspects to determine whether the installation was successful or failed:
1. Can the equipment operate normally?
After debugging, the equipment needs to be tested to ensure that the equipment can run normally. If the device is functioning properly, the installation is successful.
two。 Is the packing effect good?
When testing, the packaging effect also needs to be checked. If the packaging effect is good, the sealing of the bag is firm, the packaging speed is stable, etc., then the installation is successful.
3. Whether it meets the production requirements
After the test is completed, it is also necessary to evaluate whether the equipment meets the production requirements. If the equipment can meet the production requirements, the installation is successful.
In short, the installation of double-bag packaging machine is a very critical task. Only after the preparatory work is done, the installation steps are correct, and testing and evaluation are carried out, can the installation be successful. If the installation fails, it will have a negative impact on the production of the enterprise. Therefore, in the installation of double-bag packaging machine, must be taken seriously to ensure the success of the installation.