YanMao palletizer
A list of the contents of this article:
- 1 、How to disassemble the cassette gas tank?
- 2 、How to inflate a cartridge butane tank
- 3 、What is the working principle of pneumatic baling machine?
- 4 、Can card gas be used in the room?
How to disassemble the cassette gas tank?
If you use a LPG tank to charge, first buy a card gas-flat gas tank converter, and then buy a flat gas tank charging valve. When in use, first drain the remaining gas of the card gas, weigh it, and then put it on the converter. Fill the LPG tank at home with an inflatable valve and turn it upside down. After docking, begin to inflate. It is best to put on the scale to charge, and the original net content is about the same, stop, the second inflation will be less.
How to inflate a cartridge butane tank
If you use a LPG tank to charge, first buy a card gas-flat gas tank converter, and then buy a flat gas tank charging valve. When in use, first drain the remaining gas of the card gas, weigh it, and then put it on the converter. Fill the LPG tank at home with an inflatable valve and turn it upside down. After docking, begin to inflate. It is best to put on the scale to charge, and the original net content is about the same, stop, the second inflation will be less.
The so-called cassette stove, which takes butane gas as the main combustion gas, can also be burned with liquefied gas and heated by direct fire, also known as “portable butane gas stove” and “portable oven”. It is a newly emerging kitchen utensils in recent years, often used for family outdoor leisure and hotel utensils.
Extended data:
When the cassette furnace is working, the butane gas enters the regulator from the butane cylinder, which is adjusted by the regulator and mixes part of the air at the same time. These mixed gases are ejected from the fire hole of the distributor and ignited by the ignition device to form a flame. These flames are used to heat the cooking utensils placed on the pot bracket.
Cassette furnaces are often ignited by piezoelectric ceramics, and the biggest advantage is that they do not need batteries. However, the success rate of ignition is related to the ambient humidity, and it is not easy to light when the humidity is high. In addition, you need to press and hold the switch to start the fire, which is not as fast as the electronic pulse ignition. Of course, the success rate and times of piezoelectric ceramic ignition also depend on the quality of magnetic needles. Good magnetic needles can ignite tens of thousands or more times, while general or poor quality magnetic needles may only be lit thousands of times.
Source: Baidu encyclopedia-cassette stove
What is the working principle of pneumatic baling machine?
The function of the pneumatic packing machine is to tighten the packing belt, weld the joint of the packing belt, and remove the excess strap. the principle is (the pneumatic motor drives the turbine to tighten, and the welding motor drives the vibrator to produce temperature).
Can card gas be used in the room?
Pay attention to safety in indoor use
Cassette gas: the main ingredient is butane, which is not limited by power supply, high calorific value during combustion and non-radiation are widely used in indoor and outdoor food cooking, heating and barbecue, and are welcomed by hot pot restaurants and ordinary families. Now, card gas is used in more fields, such as heaters, refrigerators, generators, industrial cutting and so on.
This is the end of the introduction of card gas packaging. thank you for taking the time to read the contents of this site. For more information about what card gas is used for, don’t forget to look it up on this site.
