Nowadays, the automation level of robot palletizer has improved a lot, but the problem that does not cause accidents should not be underestimated, otherwise it is still possible to cause accidents. In order to ensure that the robot palletizer can complete the stacking operation with high speed and stability without accidents, on the one hand, it is necessary to take protective measures, on the other hand, it is necessary to operate and use the equipment correctly.
During the operation of the robot palletizer, there is no reasonable protection for the export of materials, just through a warning sign or a workflow that needs to be isolated is far from enough. After the risk is reduced, there should be no accident, and then consider taking corresponding measures.
When maintenance workers carry out maintenance at the bottom of the robot palletizer, if the equipment is not equipped with a mechanical locking device, it is easy to cause squeeze injury due to the falling of the stacking device, so the protective devices in each area are essential for the robot palletizer.
For those who open the interlock switch to enter the dangerous area, due to the failure of the lifting part of the stacker, such as a broken chain, if the part of the stacker does not have a mechanical locking device or check valve, the platform of the stacker will fall.
In order to avoid such accidents, in addition to requiring no accident protection devices, it is strictly forbidden for personnel to open the interlock switch of the robot palletizer at will and enter the dangerous area. Every operation of the equipment should be carried out in strict accordance with the specifications in order to eliminate the hidden danger of accidents.
Shandong Da Zhi Cong Intelligent equipment Co., Ltd.
Do you have a palletizer installed? What’s the difference between a single-station stacker and a double-station palletizer?
Hello, single-station palletizer has only one stacker station, dual-station palletizer has left and right two palletizing stations. The efficiency of dual-station is higher than that of single-station, and there is no waiting time when palletizing. Many of the single station will be equipped with pallet library, will be full stack output, empty pallet input, but in the process will always be in a state of waiting, wasting time and reducing efficiency. Dual station does not have this problem, one side of the code will immediately code the other side, do not have to wait, more efficient, and can place multiple pallets at a time, do not need to configure the pallet library. The area of the dual station is also smaller than that of the single station with a tray library, but the price may be a little more expensive, in short, it is better to buy a dual station as far as possible, and you do not know how to contact me, Taian Xianfeng Automation Technology Co., Ltd.
What are the types of palletizers?
Automatic palletizer systems are generally divided into the following three categories:
High position palletizer
Turn left | turn right
Yuzhuang YZ-HP high position palletizer
Fully automatic high position stacker
Video from: Youku
High position palletizer video
The high-position palletizer receives the palletizing products at a certain height or level above the pallet. Blank pallet from one
A silo or accumulation station goes down to the palletizer, where the machine stretches the pallet and positions it under a pallet; the product is loaded into a pallet and assembled into a layer or row.
The palletizer places the assembled product layer or product column on the pallet below them; then the palletizer continues to assemble the second layer of products, changing the arrangement format of the cartons to match the pallet format; after that, the pallet
And the first-tier product will go down one layer so that the second-tier product can be placed on the first-tier product. The pallet keeps falling.
Layer after layer of products continue to be high until the specified number is completed; the pallets then slowly descend to the ground level and are then transported to other sections by transporters or forklifts. Back and forth.
Middle and low position palletizer
Turn left | turn right
Yuzhuang YZ-LP low position palletizer
Mengniu milk automatic palletizer
Video from: Youku
Low position palletizer video
Middle and low position palletizer: the situation of middle and low position palletizer is similar to that of high position stacker. It’s just that the pallets on the middle and low position pallets do not need to be raised.
High and low, the product layer and product line are formed at a level close to the ground. Each layer of products is made on a tray.
After the shape, then lift it and place it on a fixed pallet. After that, the tray goes back to the starting point to load the next layer of products. Goods
After the tray is loaded, the palletizer unloads it, and another blank pallet replaces its original position, and so on.
Robotic palletizer
Turn left | turn right
Yuzhuang YZ-RP robot palletizer
The mechanical hand palletizer is self-contained.
Video from: Youku
Robot palletizer video
Robotic palletizer: a robotic palletizer is often seen as a grab and placement system, which can be obtained from one or more locations.
Grab one or more cartons and place them in a pre-set location on the pallet. Basic computing power, plus
Sensors can be integrated to identify product changes, making the robot palletizer an intelligent system that can identify and distinguish a variety of products.
Products; a robot can automate multiple production lines, arranging the shipping ports of multiple production lines next to a robot station, and the robot can identify and process a variety of products; robot palletizing can also produce pallets of different sizes and shapes.
What on earth is a palletizer? All I know is that it’s packaging equipment.
The palletizer is to put the cartons that have been packed into the container on the pallet (wood) according to a certain arrangement code, which can be stacked automatically, which can be stacked in multiple layers, and then pushed out to facilitate forklift transportation to the warehouse for storage. This equipment adopts PLC+ touch screen control to realize intelligent operation and management, which is simple and easy to master. The labor force and labor intensity can be greatly reduced. The design adopts the concept of high speed, stability and space saving. The use of separate plate, faster, more space-saving. One machine is multi-purpose and can be adjusted quickly, so you don’t have to worry about changing stacked products.
What is the working principle of the stacker?
The palletizing manipulator is a kind of high-tech equipment, the user needs to input the data in advance, and the control system of the palletizer controls the automatic palletizing according to the data. It can divide the goods into the same quantity according to certain steps and put them in a place. According to the pre-set data for standardized and beautiful placement, it is convenient for future transportation or storage. The existence of the palletizing manipulator can greatly improve the work efficiency of a factory, reduce the labor intensity of the palletizing workers in the factory, let the workers have spare time to do other work, and save time, so as not to delay the palletizing. It can also complete the production and transportation of other products.
This is the end of the introduction about the cost of one yard, two yards and one stacker. I wonder if you have found the information you need. If you want to know more about this, remember to collect and follow this site.
YanMao palletizer
