Unloading palletizer (latest stacker video)

Article catalogue:

• 1 、Port handling machinery mainly includes
• 2 、How to remove the fourth shaft encoder of the smart palletizer?
• 3 、Is there any difference between robotic palletizer and ordinary palletizing?
• 4 、What are the logistics and transportation equipment?
• 5 、Yilida automatic palletizer Division
• 6 、How to realize automatic feeding, blocking and unloading by automatic mechanism

Port handling machinery mainly includes

Port loading and unloading machinery includes two categories: front court and rear court. The front court is mainly responsible for loading or unloading goods from the shore to the shore. The main equipment are gantry crane, quayside crane, bucket wheel continuous loading bridge and container loading bridge. The main purpose of the backyard is to unload the goods from the port vehicles and put them in the designated stacks or warehouses. Or load the goods for the vehicles leaving the port. The main equipment are: forklift, gantry crane, tire crane, palletizer, trestle and crane, loader, excavator and so on.

How to remove the fourth shaft encoder of the smart palletizer?

1. First, the elevator is overhauled to make sure that the car is empty, the power is off, the indicator of the frequency converter is off, the encoder line is removed, and the cover is removed.

2. Secondly, loosen the encoder tightening screw with 2.5 inner hexagon wrench, make sure that the encoder can be turned by hand, and loosen the fixed central hexagonal screw M5 × 50 about 1.5 times counterclockwise. This step is very important.

3. Once again, screw in the M10 × 90mm bolt by hand in the center of the encoder, use the 16mm wrench to turn the M10 × 90mm bolt clockwise, top the M5 × 50mm inner hexagon screw end face, hear a slight sound of “knock”, feel that the M10 × 90 bolt is loose, the encoder cone head is detached from the main engine cone sleeve, stop the wrench force, and exit the 10 × 90 bolt.

4. Finally, exit the inner hexagonal M5 × 50mm bolt of the fixed encoder and remove the encoder.

Is there any difference between robotic palletizer and ordinary palletizing?

Of course, there are differences. Ontologies can be the same, but most of them are different. The welding robot can also palletize when the welding torch is removed and the claw is installed, and the palletizing robot can also weld the claw when it is installed with the welding torch.

It must be divided into special ones, just like you can take a van to pull goods and take a van to carry people.

What are the logistics and transportation equipment?

Logistics equipment includes: 1. Horizontal transport equipment, including all kinds of vehicles, conveyor belts, belt conveyors, etc. Packaging equipment: including packaging, packaging machinery, coding equipment, etc.; 3. Vertical conveying equipment: including hoist, forklift, palletizer, etc. Loading and unloading equipment: such as large quayside crane (container door crane), various professional ship unloading equipment; 5. Safety monitoring equipment; 6. Automatic management of equipment.

Yilida automatic palletizer Division

It is a special research and development under Yilida Packaging equipment Co., Ltd. (supervised by Taiwan Yilida International Group Holdings Co., Ltd.) fully automatic palletizer, packaging and palletizing production line, fully automatic stacker, automatic stacker, fully automatic carton stacker system, robot palletizer, palletizing manipulator, manipulator palletizer, mechanical palletizer, logistics palletizing robot, robot stacker, The automation department of robotic carton stacker system, robot pallet stacker, carton stacker, pallet stacker, pallet stacker, grease stacker, floor board stacker, can can stacker, unloader, unloader, bottle unloader, cardboard unloader, unloader. Yilida designs and develops according to the particularity and difference of your products and articles, which belongs to the automatic palletizer dedicated to your products. Yilida automatic palletizer (produced by Taiwan Yilida International Group Holdings Co., Ltd.) is to put cartons or bag-shaped packages that have been packed into containers on pallets and pallets (wood, plastic) according to a certain arrangement for automatic stacking, which can be stacked in multiple layers, and then launched to facilitate forklift transportation to the warehouse for storage. This equipment adopts PLC touch screen control to realize intelligent operation and management, which is simple and easy to master. The labor force and labor intensity can be greatly reduced. The design adopts the concept of high speed, stability and space saving. The use of separate plate, faster, more space-saving. One machine is multi-purpose and can be adjusted quickly, so you don’t have to worry about changing stacked products. Scope of application: corrugated cartons, plastic boxes, barrel packaging, bag packaging. Yilida automatic palletizer is a mechanical and electrical integrated high-tech products, medium and low palletizers can meet the needs of medium and low output production. According to the required grouping mode and the number of layers, the palletizing of various products such as material bags, rubber blocks, boxes and so on can be completed. The optimized design makes the pallets compact and neat. Yilida middle and low position palletizer is mainly composed of flattening conveyor, slow stop conveyor, indexable conveyor, pallet silo, pallet conveyor, marshalling machine, pouch pushing device, palletizing device and palletizing conveyor. Its structural design is optimized and its action is stable and reliable. The palletizing process is completely automatic and does not require human intervention in normal operation, so it has a wide range of application. Yilida automatic palletizer (produced by Taiwan Yilida International Group Holdings Co., Ltd.) is mainly used in automatic production enterprises such as food, grain and oil, oil, beverage, canned beverage, mineral water, beer, alcohol, red wine, wine, chemical industry, cosmetics, health products, medicine, medicine, fertilizer, feed, electronics, electrical appliances, plastics, tobacco, floor boards, household products, etc. Suitable for all kinds of cartons, bags, cans, beer cases, bags, boxes, crates, bottles, bags, filling buckets, boxes and other shapes of packaging; palletizing, unpalletizing, unloading, material handling process. The equipment of Yilida palletizer usually passes through the material lifting equipment or from the silo to the weighing equipment for the powdery materials that need to be packaged. The electronic weighing equipment completes the automatic weighing process according to the preset, and sends the materials into the packaging equipment for packaging. The packaged materials are re-checked by the weighing scale, and the unqualified packaging will be automatically removed. At the same time, the weighing scale can also provide feedback signals to the weighing equipment and adjust the checking setting. Metal detectors can be installed before the material enters the packaging machine and after the packaging is completed to detect whether there are metal foreign bodies mixed into the product. In line with the standard packaging for spray coding, shaping, transportation, palletizing, winding, until sending, the whole process can be managed by computer PLC to realize the automation of packaging production. Yilida palletizer Division will carry out special packaging line design for users according to the different products and the different needs of users. Yilida automatic packaging and palletizing equipment is widely used for automatic packaging and palletizing of powder and granular materials in food, beverage, petrochemical, chemical, plastic, fertilizer, raw materials, medicine, feed, grain, non-ferrous minerals and building materials industries. (supervised by Taiwan Yilida International Group Holdings Co., Ltd.)

Add: 88 Long John avenue, Nanzhuang, Chancheng district, Foshan city, Guangdong province

How to realize automatic feeding, blocking and unloading by automatic mechanism

There are many kinds of automatic logistics handling equipment, the defects and advantages of each kind of equipment can not be generalized, the following are briefly introduced. The automatic palletizer is a high-tech product with the integration of machinery and electricity, which mainly stacks the packaged products (boxes, bags and buckets) onto the corresponding empty pallets in a certain order through a continuous mechanical movement. in order to facilitate the handling and transportation of batches of products, so as to improve the efficiency of production. According to the different entrance height, the palletizer can be divided into high-position palletizer and low-position stacker. The working principle of the palletizer is that the workpiece on the plate meets the requirements of the pallet, and the plate and the workpiece move forward until the vertical surface of the pallet. The upper stopper rod drops, the other three sides position the stopper bar to start and clamp, and the plate resets at this time. Each workpiece falls to the pallet plane, the pallet plane is 10mm away from the bottom of the plate, and the pallet drops one workpiece height. Repeat the above until the pallet stack meets the set requirements. Its structural design is optimized and its action is stable and reliable. The palletizing process is completely automatic and does not require human intervention in normal operation, so it has a wide range of application. At present, the palletizer is mainly used in food and beverage industry, chemical industry and so on, such as supporting in three-in-one filling line, etc., to palletize all kinds of bottles and bags. The automatic operation of the palletizer is divided into automatic box feeding, rotating box, separate arrangement, stacking, stack moving, stack lifting, stack lifting, stacking, stacking, stacking and so on. The efficiency of the palletizer can reach 25-70 boxes per minute (membrane packaging) and can be completely docked with the high-speed production line. The robot hand automatic palletizer is to complete the palletizing operation of the finished product encapsulated by the sealing machine on the tray, while the uncoding of the finished product will be completed by the machine hand. The technical difficulty of unpacking is greater than that of palletizing, mainly because the original stacked pallet is deformed due to the deformation of the finished product box and the vibration in the conveying process, so that each uncoded finished pallet will deviate from the ideal position. In addition, because the unpacking tray is the finished product box close to the finished product box, the general equipment can not be inserted between the two boxes, which makes it a problem to hold the finished product box. The solution is to use a vacuum sucker to absorb the finished product. Compared with the traditional elevated stacker, the manipulator stacker has the following advantages: first, energy saving; second, the failure rate is low; third, the area is small; fourth, the cost of human resources is low. Automatic guided vehicle (AGV) has become increasingly well known in the manufacturing and material handling industries. But the shuttle introduced here is based on the equipment that automatically carries materials in the way of transportation with tracks. The shuttle is generally used in the corridor shelf, which is accepted by many storage and transportation units because of its high space utilization, but the forklift truck drives into the roadway, because of the narrow space, there is a hidden danger of shelf collapse. In addition, the use of forklifts and manual handling efficiency is low, the cost is high, the introduction of automated shuttle on the basis of the original shelf, in order to improve the automation level of production, storage and transportation.

This is the end of the video introduction of the unloading palletizer and the latest palletizer. I wonder if you have found the information you need? If you want to know more about this, remember to collect and follow this site.