YanMao Group palletizer China palletizer manufacturer

Focus on the development and manufacturing of automatic carton palletizers for 10 years


Trade News

Unloading stacker (lifting stacker)

A list of the contents of this article:

What are the types of palletizers?

Automatic palletizer systems are generally divided into the following three categories:

High position palletizer

Turn left | turn right

Yuzhuang YZ-HP high position palletizer

Fully automatic high position stacker

Video from: Youku

High position palletizer video

The high-position palletizer receives the palletizing products at a certain height or level above the pallet. Blank pallet from one

A silo or accumulation station goes down to the palletizer, where the machine stretches the pallet and positions it under a pallet; the product is loaded into a pallet and assembled into a layer or row.

The palletizer places the assembled product layer or product column on the pallet below them; then the palletizer continues to assemble the second layer of products, changing the arrangement format of the cartons to match the pallet format; after that, the pallet

And the first-tier product will go down one layer so that the second-tier product can be placed on the first-tier product. The pallet keeps falling.

Layer after layer of products continue to be high until the specified number is completed; the pallets then slowly descend to the ground level and are then transported to other sections by transporters or forklifts. Back and forth.

Middle and low position palletizer

Turn left | turn right

Yuzhuang YZ-LP low position palletizer

Mengniu milk automatic palletizer

Video from: Youku

Low position palletizer video

Middle and low position palletizer: the situation of middle and low position palletizer is similar to that of high position stacker. It’s just that the pallets on the middle and low position pallets do not need to be raised.

High and low, the product layer and product line are formed at a level close to the ground. Each layer of products is made on a tray.

After the shape, then lift it and place it on a fixed pallet. After that, the tray goes back to the starting point to load the next layer of products. Goods

After the tray is loaded, the palletizer unloads it, and another blank pallet replaces its original position, and so on.

Robotic palletizer

Turn left | turn right

Yuzhuang YZ-RP robot palletizer

The mechanical hand palletizer is self-contained.

Video from: Youku

Robot palletizer video

Robotic palletizer: a robotic palletizer is often seen as a grab and placement system, which can be obtained from one or more locations.

Grab one or more cartons and place them in a pre-set location on the pallet. Basic computing power, plus

Sensors can be integrated to identify product changes, making the robot palletizer an intelligent system that can identify and distinguish a variety of products.

Products; a robot can automate multiple production lines, arranging the shipping ports of multiple production lines next to a robot station, and the robot can identify and process a variety of products; robot palletizing can also produce pallets of different sizes and shapes.

How to realize automatic feeding, blocking and unloading by automatic mechanism

There are many kinds of automatic logistics handling equipment, the defects and advantages of each kind of equipment can not be generalized, the following are briefly introduced. The automatic palletizer is a high-tech product with the integration of machinery and electricity, which mainly stacks the packaged products (boxes, bags and buckets) onto the corresponding empty pallets in a certain order through a continuous mechanical movement. in order to facilitate the handling and transportation of batches of products, so as to improve the efficiency of production. According to the different entrance height, the palletizer can be divided into high-position palletizer and low-position stacker. The working principle of the palletizer is that the workpiece on the plate meets the requirements of the pallet, and the plate and the workpiece move forward until the vertical surface of the pallet. The upper stopper rod drops, the other three sides position the stopper bar to start and clamp, and the plate resets at this time. Each workpiece falls to the pallet plane, the pallet plane is 10mm away from the bottom of the plate, and the pallet drops one workpiece height. Repeat the above until the pallet stack meets the set requirements. Its structural design is optimized and its action is stable and reliable. The palletizing process is completely automatic and does not require human intervention in normal operation, so it has a wide range of application. At present, the palletizer is mainly used in food and beverage industry, chemical industry and so on, such as supporting in three-in-one filling line, etc., to palletize all kinds of bottles and bags. The automatic operation of the palletizer is divided into automatic box feeding, rotating box, separate arrangement, stacking, stack moving, stack lifting, stack lifting, stacking, stacking, stacking and so on. The efficiency of the palletizer can reach 25-70 boxes per minute (membrane packaging) and can be completely docked with the high-speed production line. The robot hand automatic palletizer is to complete the palletizing operation of the finished product encapsulated by the sealing machine on the tray, while the uncoding of the finished product will be completed by the machine hand. The technical difficulty of unpacking is greater than that of palletizing, mainly because the original stacked pallet is deformed due to the deformation of the finished product box and the vibration in the conveying process, so that each uncoded finished pallet will deviate from the ideal position. In addition, because the unpacking tray is the finished product box close to the finished product box, the general equipment can not be inserted between the two boxes, which makes it a problem to hold the finished product box. The solution is to use a vacuum sucker to absorb the finished product. Compared with the traditional elevated stacker, the manipulator stacker has the following advantages: first, energy saving; second, the failure rate is low; third, the area is small; fourth, the cost of human resources is low. Automatic guided vehicle (AGV) has become increasingly well known in the manufacturing and material handling industries. But the shuttle introduced here is based on the equipment that automatically carries materials in the way of transportation with tracks. The shuttle is generally used in the corridor shelf, which is accepted by many storage and transportation units because of its high space utilization, but the forklift truck drives into the roadway, because of the narrow space, there is a hidden danger of shelf collapse. In addition, the use of forklifts and manual handling efficiency is low, the cost is high, the introduction of automated shuttle on the basis of the original shelf, in order to improve the automation level of production, storage and transportation.

Port handling machinery mainly includes

Port loading and unloading machinery includes two categories: front court and rear court. The front court is mainly responsible for loading or unloading goods from the shore to the shore. The main equipment are gantry crane, quayside crane, bucket wheel continuous loading bridge and container loading bridge. The main purpose of the backyard is to unload the goods from the port vehicles and put them in the designated stacks or warehouses. Or load the goods for the vehicles leaving the port. The main equipment are: forklift, gantry crane, tire crane, palletizer, trestle and crane, loader, excavator and so on.

Yilida automatic palletizer Division

It is a special research and development under Yilida Packaging equipment Co., Ltd. (supervised by Taiwan Yilida International Group Holdings Co., Ltd.) fully automatic palletizer, packaging and palletizing production line, fully automatic stacker, automatic stacker, fully automatic carton stacker system, robot palletizer, palletizing manipulator, manipulator palletizer, mechanical palletizer, logistics palletizing robot, robot stacker, The automation department of robotic carton stacker system, robot pallet stacker, carton stacker, pallet stacker, pallet stacker, grease stacker, floor board stacker, can can stacker, unloader, unloader, bottle unloader, cardboard unloader, unloader. Yilida designs and develops according to the particularity and difference of your products and articles, which belongs to the automatic palletizer dedicated to your products. Yilida automatic palletizer (produced by Taiwan Yilida International Group Holdings Co., Ltd.) is to put cartons or bag-shaped packages that have been packed into containers on pallets and pallets (wood, plastic) according to a certain arrangement for automatic stacking, which can be stacked in multiple layers, and then launched to facilitate forklift transportation to the warehouse for storage. This equipment adopts PLC touch screen control to realize intelligent operation and management, which is simple and easy to master. The labor force and labor intensity can be greatly reduced. The design adopts the concept of high speed, stability and space saving. The use of separate plate, faster, more space-saving. One machine is multi-purpose and can be adjusted quickly, so you don’t have to worry about changing stacked products. Scope of application: corrugated cartons, plastic boxes, barrel packaging, bag packaging. Yilida automatic palletizer is a mechanical and electrical integrated high-tech products, medium and low palletizers can meet the needs of medium and low output production. According to the required grouping mode and the number of layers, the palletizing of various products such as material bags, rubber blocks, boxes and so on can be completed. The optimized design makes the pallets compact and neat. Yilida middle and low position palletizer is mainly composed of flattening conveyor, slow stop conveyor, indexable conveyor, pallet silo, pallet conveyor, marshalling machine, pouch pushing device, palletizing device and palletizing conveyor. Its structural design is optimized and its action is stable and reliable. The palletizing process is completely automatic and does not require human intervention in normal operation, so it has a wide range of application. Yilida automatic palletizer (produced by Taiwan Yilida International Group Holdings Co., Ltd.) is mainly used in automatic production enterprises such as food, grain and oil, oil, beverage, canned beverage, mineral water, beer, alcohol, red wine, wine, chemical industry, cosmetics, health products, medicine, medicine, fertilizer, feed, electronics, electrical appliances, plastics, tobacco, floor boards, household products, etc. Suitable for all kinds of cartons, bags, cans, beer cases, bags, boxes, crates, bottles, bags, filling buckets, boxes and other shapes of packaging; palletizing, unpalletizing, unloading, material handling process. The equipment of Yilida palletizer usually passes through the material lifting equipment or from the silo to the weighing equipment for the powdery materials that need to be packaged. The electronic weighing equipment completes the automatic weighing process according to the preset, and sends the materials into the packaging equipment for packaging. The packaged materials are re-checked by the weighing scale, and the unqualified packaging will be automatically removed. At the same time, the weighing scale can also provide feedback signals to the weighing equipment and adjust the checking setting. Metal detectors can be installed before the material enters the packaging machine and after the packaging is completed to detect whether there are metal foreign bodies mixed into the product. In line with the standard packaging for spray coding, shaping, transportation, palletizing, winding, until sending, the whole process can be managed by computer PLC to realize the automation of packaging production. Yilida palletizer Division will carry out special packaging line design for users according to the different products and the different needs of users. Yilida automatic packaging and palletizing equipment is widely used for automatic packaging and palletizing of powder and granular materials in food, beverage, petrochemical, chemical, plastic, fertilizer, raw materials, medicine, feed, grain, non-ferrous minerals and building materials industries. (supervised by Taiwan Yilida International Group Holdings Co., Ltd.)

Add: 88 Long John avenue, Nanzhuang, Chancheng district, Foshan city, Guangdong province

This is the end of the introduction of the unloading stacker. Thank you for taking the time to read the contents of this site. Don’t forget to look for more information about the lifting stacker and unloader on this site.



Leave a Reply

Phone +86-17772230517

WhatsApp +8617772230517

Leave a message