Wrapping packing machine is a kind of automatic packaging equipment, which can pack items automatically, which improves the packaging efficiency and reduces the labor cost. However, the installation of wrapped packing machine is not a simple thing, need to pay attention to a lot of key details. In this article, we will give you a detailed introduction to the key details that you need to pay attention to when installing a wrapping packing machine.
I. preparatory work
Before installing the wrapped packing machine, some preparatory work needs to be done, including measuring the installation location, checking whether the equipment accessories are complete, checking whether the power supply voltage meets the equipment requirements, and so on. In these preparations, the most important thing is to measure the installation location. In the measurement, the size of the equipment, operating space, power lines and other factors need to be taken into account to ensure the normal operation of the equipment.
II. Installation of equipment
When installing the equipment, you need to follow the equipment instructions. First of all, it is necessary to determine the installation direction and location of the equipment and fix the equipment on the ground. Next, the power circuit of the equipment needs to be connected and electrically grounded. Finally, conveyor belts, controllers and other accessories need to be installed according to the requirements of the equipment.
III. Debugging equipment
After installing the equipment, the equipment needs to be debugged. The purpose of debugging the equipment is to check whether the equipment can operate normally, and to adjust the parameters of the equipment to make it reach the best condition. When debugging a device, you need to pay attention to the following points:
1. Check whether the conveyor belt is running normally, whether it is loose, stuck and so on.
two。 Check whether the controller can properly control the operation of the equipment and adjust the parameters of the equipment.
3. Check each part of the equipment for abnormal sound, friction and so on.
IV. Operating equipment
After debugging the device, you can start operating the device. The following points should be paid attention to when operating the equipment:
1. Before operating the equipment, the items need to be classified, packaged, marked and so on according to the equipment requirements.
two。 When operating the equipment, the items need to be placed smoothly on the conveyor belt to ensure that the items will not fall, tumble, etc.
3. When operating the equipment, we need to observe the operation of the equipment and adjust the parameters of the equipment in time to ensure the normal operation of the equipment.
V. maintenance of equipment
After operating the equipment for a period of time, the equipment needs to be maintained. The maintenance of the equipment includes cleaning the equipment, replacing worn parts, checking the running status of the equipment, etc. The maintenance of the equipment can extend the service life of the equipment and ensure the normal operation of the equipment.
The installation of wrapped packing machine needs to pay attention to many key details, including preparation, installation, commissioning, operation and maintenance of equipment. Only by paying attention to these key details can we ensure the normal operation of the equipment, improve the packaging efficiency and reduce the labor cost.